Total Mixed Ration for Cattle: Ingredients, Dry Matter, Mixing, and Daily Checks

Mixer wagon containing chopped forage and grain beside a dairy cattle feed alley.

A Total Mixed Ration (TMR) combines forages, grains, protein sources, minerals, vitamins, and any required additives into one formulated cattle feed. Its goal is to distribute nutrients uniformly throughout the mix. However, ingredient moisture, weighing accuracy, mixing, particle size, feed availability, and sorting can change what cattle actually consume.

Quick answers about TMR:

  • Who uses it? Both dairy and beef cattle operations.
  • What determines the formula? Cattle requirements, production stage, available ingredients, and feed analysis.
  • Is there a standard mixing ratio? No. Ingredient proportions, loading order, mixing time, and feeding groups depend on the ration, cattle, and equipment.
  • What matters most in daily management? Accurate dry-matter adjustments, consistent mixing, adequate feed availability, and monitoring what cattle actually consume.

A successful TMR feeding program requires more than combining ingredients in a mixer. The ration must be formulated correctly, prepared consistently, delivered appropriately, and monitored at the feed bunk.

1. What Is a Total Mixed Ration?

A Total Mixed Ration is a cattle-feeding method in which the ingredients of a nutritionally formulated diet are combined into a single mixture.

Rather than feeding forage and concentrate ingredients separately, the farm mixes them before delivery. The objective is to distribute nutrients throughout the feed offered and reduce opportunities for cattle to selectively consume particular ingredients.

TMR is used in both dairy and beef production. Although many detailed university extension recommendations focus on dairy cattle, the underlying principles of feed formulation, accurate weighing, mixing, and monitoring also apply to beef cattle.

The important distinction is that the ration formulated on paper is not necessarily identical to the ration each animal consumes.

Formulated vs. delivered vs. consumed TMR

1. Formulated ration

The planned ingredient quantities and nutrient composition, based on feed analyses and cattle requirements.

2. Mixed and delivered ration

What is actually loaded, mixed, and placed at the feed bunk. Moisture changes, weighing errors, or inconsistent mixing can change its composition.

3. Consumed ration

What cattle ultimately eat after sorting, refusals, spoilage, and differences in access to feed.

For example, a ration may contain the intended proportion of forage and concentrate when it leaves the mixer. If cattle preferentially consume smaller particles and leave longer forage particles behind, their actual nutrient intake may differ from the formulation.

Penn State Extension’s guidance on total mixed rations emphasizes the importance of ingredient consistency, mixing practices, sorting management, and appropriate feeding groups.

The objective is to minimize differences between the formulated, delivered, and consumed ration—not to assume that every mouthful has an identical nutrient composition.

2. What Goes Into a TMR?

A TMR combines feed ingredients that supply energy, protein, fiber, minerals, vitamins, and other nutrients required by cattle.

The exact ingredients and their proportions depend on animal requirements, feed quality, local availability, and the nutritional balance of the entire ration.

Ingredient categoryGeneral nutritional roleIllustrative examples
ForagesSupply fiber and contribute energy and other nutrientsCorn silage, haylage, alfalfa hay, grass hay
Grains and energy feedsSupply energy for maintenance and productionCorn grain, barley, other cereal grains
Protein sourcesSupply protein and other nutrientsSoybean meal, canola meal
Commodities and by-productsMay contribute fiber, protein, energy, or combinations of nutrientsWhole cottonseed, distillers grains, suitable feed by-products
MineralsSupply essential macro- and trace mineralsFormulated mineral supplements
VitaminsHelp meet vitamin requirements not adequately supplied by other ingredientsVitamin premixes
Additives, when requiredServe specific nutritional or management purposesAppropriate feed additives selected for the feeding program

These examples are not a complete cattle-feed formula, and every farm does not need to use every category separately. Some ingredients contribute nutrients across several categories.

How ingredient selection changes

Two farms may use different TMR ingredients while working toward comparable nutritional objectives.

For example, one farm may rely primarily on corn silage, while another uses more haylage and dry hay. Their grain and protein supplementation requirements may differ because those forages have different nutrient compositions.

Ingredient selection should account for:

  • Feed analysis: Actual dry matter, protein, fiber, and other relevant nutrient values.
  • Animal requirements: Body weight, production stage, body condition, and expected feed intake.
  • Feed characteristics: Moisture, particle size, storage condition, and consistency.
  • Availability: Suitable ingredients that the farm can obtain reliably.
  • Total ration balance: How each ingredient affects the overall supply of nutrients.

Replacing one ingredient with another on an equal-weight basis does not necessarily preserve the ration’s nutrient balance.

For example, replacing a wet forage with the same weight of a dry feed changes the amount of dry matter supplied, even before differences in energy, protein, and fiber are considered.

The University of Minnesota Extension’s TMR feeding guide describes TMR as a method of combining feed ingredients into a mixture formulated for a specific nutrient composition.

Practical rule: Base ingredient quantities on a complete ration formulated using current feed analyses and the nutritional requirements of the cattle being fed. A cattle nutritionist can help develop or review that formulation.

3. Why Dry Matter Matters More Than Scale Weight Alone

One of the most important calculations in TMR management is converting between dry-matter weight and as-fed weight.

The weight displayed on a mixer scale includes both dry matter and water. When an ingredient’s moisture changes, the same as-fed weight supplies a different amount of dry matter.

Dry matter vs. as-fed weight

  • As-fed weight: The total weight of a feed ingredient, including water.
  • Dry-matter weight: The weight of the ingredient excluding water.
  • Dry-matter percentage: The proportion of the ingredient’s total weight that is dry matter.
  • Moisture percentage: The proportion of the ingredient’s total weight that is water.

For example, a forage containing 40% dry matter contains 60% moisture.

A forage containing 35% dry matter is wetter and supplies less dry matter per pound of as-fed feed.

The dry-matter calculation

The basic relationships are:

Formula 1: Dry-matter fraction

$$
\text{DM fraction}=1-\text{Moisture fraction}
$$

Formula 2: Required as-fed weight

$$
\text{As-fed weight}=\frac{\text{Target DM weight}}{\text{DM fraction}}
$$

Formula 3: Dry matter supplied

$$
\text{DM supplied}=\text{As-fed weight}\times\text{DM fraction}
$$

Use decimal fractions in these formulas. For example, 40% dry matter is expressed as 0.40.

Worked example: Adjusting for wetter silage

Suppose a hypothetical ration calls for 400 lb of dry matter from silage.

Initially, the silage tests at 40% dry matter.

$$
400\div0.40=1{,}000\text{ lb as-fed}
$$

The farm needs 1,000 lb of that silage to supply 400 lb of dry matter.

Now suppose the silage becomes wetter and tests at 35% dry matter.

$$
400\div0.35\approx1{,}143\text{ lb as-fed}
$$

The farm now needs approximately 1,143 lb of silage to supply the same 400 lb of dry matter.

MeasurementOriginal silageWetter silage
Dry-matter percentage40%35%
Moisture percentage60%65%
Target dry matter400 lb400 lb
Required as-fed weight1,000 lb1,143 lb
Change in as-fed weight—+143 lb

Approximately 143 lb more wet silage is required to maintain the planned dry-matter contribution.

If the farm continues loading only 1,000 lb after the silage drops to 35% dry matter, that ingredient supplies:

$$
1{,}000\times0.35=350\text{ lb DM}
$$

That is 50 lb less dry matter than planned, potentially changing the relative contribution of the other ingredients.

This is a hypothetical arithmetic example, not a feeding recommendation. Maintaining an ingredient’s dry-matter contribution does not automatically maintain the full ration’s nutritional balance.

Dry-matter calculation worksheet

Use current measured dry-matter percentages and the target dry-matter amounts from the formulated ration.

IngredientTarget DM (lb)Measured DM (%)Required as-fed weight (lb)
Ingredient AEnter targetEnter measured DMTarget DM ÷ DM fraction
Ingredient BEnter targetEnter measured DMTarget DM ÷ DM fraction
Ingredient CEnter targetEnter measured DMTarget DM ÷ DM fraction
Ingredient DEnter targetEnter measured DMTarget DM ÷ DM fraction

Calculate each ingredient separately using its own measured dry-matter fraction. Then review whether the total batch weight, mixer capacity, and overall ration require adjustment.

When should forage moisture be checked?

Check moisture when the source or condition of a feed changes, and establish a regular monitoring schedule for variable wet ingredients.

Examples of changes that should prompt a moisture check include:

  • A new silage cutting or feed lot.
  • Feed taken from a different storage location.
  • Noticeable changes in forage wetness or consistency.
  • Changes in stored feed condition that may affect its moisture content.

A practical adjustment procedure is to:

  • Measure or obtain current dry-matter values.
  • Compare those values with the assumptions in the existing ration.
  • Recalculate the affected ingredient’s as-fed loading weight.
  • Check whether total batch weight or other ingredient quantities require adjustment.
  • Update the mixing sheet and record the change.

Moisture adjustment preserves a planned dry-matter contribution. It does not replace a full nutritional review when ingredient composition changes.

Both Penn State Extension and University of Minnesota Extension identify dry-matter management as an important part of feeding a consistent TMR.

4. How to Prepare and Mix a TMR

Preparing a TMR involves translating the formulated ration into an accurately weighed, consistently mixed, and appropriately delivered batch.

There is no universal cattle-feed mixing ratio, loading sequence, or mixing duration that works for every operation.

Step 1: Start with a complete ration formulation

Use a ration formulated for the cattle group and the feeds available.

The formulation should account for:

  • Current feed analyses.
  • Expected feed intake.
  • Body weight and production requirements.
  • Appropriate fiber and nutrient balance.
  • The nutritional contribution of each ingredient.

Do not substitute a generic percentage of silage, grain, and protein supplement for a complete formulation.

A diet suitable for lactating dairy cows, for example, should not automatically be used for growing beef cattle or dry cows.

Step 2: Verify ingredients and batch requirements

Before loading, confirm:

  • Ingredient identity, source, and condition.
  • Current dry-matter measurements.
  • The number of cattle receiving the batch.
  • Planned feed delivery and batch size.
  • Updated as-fed ingredient weights.
  • Scale condition and accuracy.
  • Mixer condition and suitability for the intended batch.

Verifying these details before mixing helps prevent errors that may be difficult to correct once ingredients have been combined.

Step 3: Follow the appropriate loading order

The loading sequence depends on mixer design, ingredient characteristics, and the manufacturer’s instructions.

Vertical mixers and auger-type mixers may require different loading practices. Ingredient form and forage particle length also affect the process.

For example, long hay may require suitable processing before it can be incorporated consistently.

Use the manufacturer’s operating instructions alongside a feeding procedure validated for the actual mixer, ingredients, and batch size.

Step 4: Mix without under-processing or over-processing

Both insufficient and excessive mixing can affect the quality of the delivered ration.

Mixing conditionPotential problemWhat to check
Under-mixingIngredients remain unevenly distributedMixer operation, loading sequence, mixing duration
Over-mixingForage particles may become excessively short, reducing effective particle structureProcessing intensity, particle condition, mixing duration
Incorrect loadingIngredients may not combine as intendedLoading sequence, fill level, ingredient form
Inaccurate weighingIngredient proportions differ from the formulationScale accuracy, loading records, operator procedures
Changing ingredient moistureThe batch supplies a different quantity of dry matter than plannedMoisture measurements and loading calculations

There is no universally correct mixing time.

A duration that works for one farm should not automatically be applied to another mixer, ration, or batch size.

Step 5: Deliver the ration and maintain feed availability

After mixing, distribute the TMR so cattle have appropriate access at the feed bunk.

Feeding management should address:

  • Consistent feed delivery.
  • Adequate bunk access for the group.
  • Feed push-up where applicable.
  • Monitoring and management of refusals.
  • Feed freshness and spoilage risks.

A properly formulated and mixed ration cannot achieve its intended purpose if cattle cannot access the feed consistently.

Step 6: Record each batch

Batch records help identify whether changes in intake, sorting, or refusals coincide with ingredient or preparation changes.

Record fieldWhat to enter
Date and feeding groupDate and group identification
Group headcountNumber of cattle
Ingredient identificationFeed name, source, or lot
Measured dry matterCurrent value for each relevant ingredient
Planned as-fed weightAmount specified on the updated mixing sheet
Actual loaded weightAmount recorded by the scale
Mixing detailsLoading sequence, mixing duration, deviations
Feed deliveredActual quantity distributed
RefusalsQuantity remaining and relevant observations
Operator notesFeed condition, equipment changes, or access issues

Reviewing these records alongside feed intake and refusal trends makes troubleshooting more systematic.

The essential principles are accurate formulation, measurement, mixing, and delivery. Loading order, batch size, mixing duration, and operating procedures must be established for the actual equipment and feeds used.

5. How to Check What Cattle Actually Consume

A farm cannot evaluate TMR consistency solely by inspecting feed as it leaves the mixer.

It must also monitor what happens at the feed bunk, including feed availability, sorting, and refusals.

Compare fresh TMR with feed refusals

Fresh feed and refusals provide useful information about sorting.

If fresh TMR contains a mixture of long forage and smaller particles, but the refusals contain a noticeably greater proportion of long forage, cattle may be selecting against those longer particles.

However, visual differences alone do not identify the cause.

Particle size, mixing quality, ration moisture, feed accessibility, and cattle behavior may all contribute.

A forage particle separator can help compare particle distribution between fresh feed and refusals when the farm uses an appropriate sampling and monitoring procedure.

Daily and periodic TMR inspection checklist

The following checklist separates routine feeding observations from measurements that can be scheduled according to feed variability and farm conditions.

Daily feeding checks

  • Confirm the cattle headcount for each feeding group.
  • Review actual ingredient loading weights against the updated mixing sheet.
  • Check the quantity of feed delivered and its availability at the bunk.
  • Observe refusals for unusual quantities or visible sorting.
  • Look for spoilage or noticeable changes in feed condition.
  • Record equipment problems, mixing deviations, and unusual cattle observations.

Periodic and change-triggered checks

  • Measure forage moisture and adjust loading weights when necessary.
  • Review feed analyses when ingredients or feed sources change.
  • Verify scale accuracy.
  • Inspect mixer wear, condition, and operation.
  • Compare particle distribution in fresh feed and refusals when investigating sorting.
  • Review intake trends and batch records with the feeding team.

Monitoring frequency should reflect ingredient variability, herd conditions, equipment performance, and the farm’s feeding program.

Calculate group-average dry-matter intake

Dry-matter intake (DMI) helps farms estimate how much feed a group consumes over a defined period.

The basic relationship is:

$$
\text{Group-average DMI}=
\frac{\text{DM delivered}-\text{DM refused}}{\text{Number of cattle}}
$$

For a hypothetical example, suppose 50 cattle receive 1,200 lb of dry matter in one day, and 150 lb of dry matter remains as refusals.

$$
\frac{1{,}200-150}{50}
=21\text{ lb DM/head/day}
$$

The estimated group-average intake is 21 lb of dry matter per animal per day.

This example demonstrates the calculation; it is not a recommended intake target.

If feed delivery and refusals are recorded as-fed, convert them to dry matter using the appropriate measured dry-matter fractions before subtracting.

For example:

$$
\text{Delivered DM}=
\text{As-fed delivered}\times\text{Delivered DM fraction}
$$

$$
\text{Refused DM}=
\text{As-fed refusals}\times\text{Refusal DM fraction}
$$

If fresh feed and refusals have different dry-matter percentages, account for that difference rather than applying one percentage to both.

For a group receiving multiple deliveries or producing multiple refusal measurements, total the corresponding dry-matter amounts over the same period.

This calculation also assumes that delivered feed and refusals are accurately measured, appropriately matched to the group, and representative of the feeding period. Unmeasured losses can affect the estimate.

Group-average DMI is not a measurement of individual intake. It does not show how much each animal consumed or whether every animal selected the same proportion of ingredients.

TMR troubleshooting: Symptoms, possible causes, and next checks

ObservationPossible contributing factorsNext check
Refusals contain more long forage than fresh TMRSorting, forage length, moisture, mixing conditionsCompare particle distribution in fresh feed and refusals
Feed looks different between batchesIngredient variation, inaccurate weighing, inconsistent mixingReview batch records, moisture values, and scale operation
Group intake appears lower than usualDry-matter changes, feed availability, feed quality, or animal-related factorsVerify delivered and refused dry matter, headcount, and bunk access
Some ingredients appear poorly mixedLoading sequence, mixer condition, insufficient mixingCheck mixer instructions, equipment condition, and batch details
Forage particles appear excessively shortExcessive processing or mixingReview forage preparation and mixing procedures
Refusals increase unexpectedlyDelivery quantity, palatability, sorting, intake changes, or feed conditionCheck fresh feed, refusals, recent ration changes, and cattle observations
Feed heats or spoils at the bunkStorage conditions, environmental exposure, feeding interval, or remaining feedReview feed freshness, bunk management, and delivery practices

These observations should guide investigation rather than serve as diagnoses.

Feed appearance alone cannot establish rumen health, identify disease, or demonstrate that a ration prevents digestive disorders. Persistent intake changes or animal health concerns warrant review with the farm’s nutritionist or veterinarian.

6. Potential Benefits, Limitations, and Whether a Mixer Is Worth It

A well-managed TMR program can help deliver a more consistent combination of ingredients than feeding them separately.

However, results depend on formulation, ingredient consistency, mixer performance, feeding management, and cattle behavior.

Potential benefits and limitations

Potential benefitWhen it may be realizedImportant limitation
More consistent nutrient deliveryIngredients are accurately weighed and mixedMoisture variation and sorting can still change consumption
Reduced selective intakeThe ration is appropriately mixed and its physical characteristics discourage sortingCattle may still separate long forage and smaller particles
More coordinated feedingThe farm follows a clear mixing and delivery procedureEquipment, operator skills, and records remain important
Potential labor efficiencyMixing and delivery replace less efficient existing feeding tasksLoading, maintenance, and operating time may offset savings
Potential production benefitsImproved ration consistency addresses existing nutritional or feeding limitationsHigher milk yield or faster weight gain is not guaranteed
More systematic monitoringBatch records and refusal measurements are maintainedGroup-level measurements cannot fully describe individual intake

Guidance from University of Minnesota Extension and Penn State Extension describes the potential advantages of TMR feeding while emphasizing the management needed to achieve consistent results.

What are the disadvantages of TMR feeding?

TMR feeding can introduce additional equipment and management requirements.

Potential challenges include:

  • Investment in mixing equipment, scales, and feed-handling facilities.
  • Regular equipment operation, inspection, and maintenance.
  • Feed testing and moisture monitoring.
  • Operator training and accurate loading procedures.
  • Additional work when different cattle groups require separate rations.
  • Sorting or nutritional inconsistency when mixing and bunk management are inadequate.

Preparing a single ration for cattle with substantially different nutritional requirements may also reduce how closely the diet matches the needs of individual animals.

Is a TMR mixer worth the investment?

The answer depends on herd size, feeding practices, existing facilities, and the full cost of operating the proposed system.

A dedicated mixer may be worthwhile when:

  • The farm routinely prepares mixed diets.
  • Cattle numbers and batch requirements make mechanized mixing practical.
  • Suitable feed-handling and bunk facilities are available.
  • The operation can maintain the equipment and verify mixing performance.
  • The expected improvements address measurable problems in the existing feeding system.

A dedicated mixer may be less suitable when:

  • The herd is small or relies heavily on pasture.
  • Mixing volumes are limited.
  • Existing facilities cannot accommodate the equipment.
  • Additional equipment and operating costs outweigh the expected benefits.
  • The farm cannot consistently manage separate batches, equipment maintenance, and feeding records.

Mixer-investment comparison worksheet

Compare the existing feeding system with a proposed TMR system using farm-specific data.

FactorCurrent feeding systemProposed TMR system
Number of cattle____________
Feeding groups or rations____________
Feed batches per day____________
Labor hours____________
Equipment purchase or ownership cost____________
Fuel, electricity, or other operating costs____________
Repairs and maintenance____________
Facilities or infrastructure changes____________
Feed testing and monitoring costs____________
Documented or reasonably projected feeding improvements____________

Also consider equipment capacity, ingredient characteristics, available working space, and operator experience.

A proposed reduction in labor or improvement in production should be included only when the farm has a reasonable basis for estimating it.

There is no universal mixer payback period or guaranteed performance improvement. The decision should rest on realistic ownership and operating costs compared with the farm’s actual feeding requirements and measurable outcomes.

7. Matching the Ration to Different Cattle Groups

Not every animal should automatically receive the same TMR.

Nutritional requirements vary with body weight, production stage, body condition, expected feed intake, and production objectives.

Grouping cattle can help the formulated ration more closely match the needs of the animals receiving it.

Factors to consider when organizing feeding groups

FactorWhy it mattersPractical consideration
Production stageNutrient requirements change across growth, pregnancy, lactation, and other stagesDetermine whether a different formulation is needed
Body weightMaintenance requirements and intake capacity varyAccount for weight differences in diet formulation
Body conditionAnimals with different condition scores may require different nutritional managementMonitor body condition and review ration suitability
Expected feed intakeCattle consuming different amounts may need different ration nutrient concentrationsUse suitable intake estimates and monitored group averages
Production requirementsNutritional demands vary with milk production or growth objectivesMatch the ration to realistic group requirements
Herd sizeSmall groups may be operationally impracticalBalance nutritional advantages against management complexity
Housing and bunk accessFacilities affect whether cattle can be fed separately and consistentlyAssess pen space, feed delivery, and access
Labor and equipmentMore groups may require additional batches and feeding timeConfirm that the farm can reliably manage the proposed system

Dairy cattle

Dairy herds may have substantially different nutritional requirements among lactating cows, dry cows, and animals at different production stages.

Milk production, body condition, expected intake, and stage of lactation can influence the appropriate ration.

Grouping can help account for those differences, but the number and composition of feeding groups should reflect the individual herd.

Beef cattle

Beef operations may require different rations for growing, finishing, breeding, or other management groups.

Body weight, expected intake, and production objectives influence the nutrient requirements of each group.

As with dairy cattle, suitable ingredient quantities depend on feed analyses and a complete ration formulation rather than a universal mixing ratio.

How many feeding groups are needed?

There is no fixed minimum number that applies to every farm.

Additional groups may allow closer nutritional matching, but they also increase mixing, labor, and feed-delivery complexity.

The goal is to organize cattle into groups that can be fed appropriately and managed consistently.

Both University of Minnesota Extension and Penn State Extension discuss feeding groups in relation to nutritional requirements, production stage, body condition, and operational considerations.

Putting TMR Management Into Practice

A Total Mixed Ration works best when feeding is managed as a complete process rather than simply a mixing task.

Start with a balanced formulation based on current feed analyses and the requirements of the cattle. Convert planned ingredient dry matter into accurate as-fed loading weights, verify the scale and mixer, and follow equipment-specific mixing procedures.

After delivery, monitor feed availability, refusals, sorting, ingredient moisture, and group-average dry-matter intake. Use batch records to investigate differences between the planned ration and what cattle receive.

The central principle is straightforward: the more closely the ration cattle consume matches the ration originally formulated, the more consistently the feeding program can meet its intended nutritional objectives.

Achieving that consistency requires accurate calculations, suitable equipment practices, and routine monitoring—not a universal mixing formula or an assumption that TMR eliminates selective feeding.

Sources

Contact Us
fr_FRFrench
#!trpst#trp-gettext data-trpgettextoriginal=0#!trpen#Retour en haut#!trpst#/trp-gettext#!trpen#
Request Quote Today